Construction of Ag/CdZnS QDs nanocomposite for enhanced visible light photoinactivation of Staphylococcus aureus.

With increasing use of antibiotics, the development of antibiotic-resistant pathogens poses a serious threat to human health and the environment. Photocatalytic inactivation of these harmful pathogens is one of the novel and non-antibiotic treatments. The study fabricated Ag NPs decorated CdZnS QDs via a facile and biological co-precipitation method using L. camara plant extract as a green alternative to treat the toxic chemicals. The fabricated Ag/CdZnS QDs (NCs) were prepared for the efficient treatment of antibiotic-resistant pathogens as they raise a major global concern. The fabricated NCs were characterized with various characterization techniques to verify its physicochemical properties. The fabricated NCs have shown excellent photo-sterilization performance of 97 % against S. aureus. The excellent activity was attributed to the decoration of Ag NPs on CdZnS QDs as it helped in shortening band gap, improved visible light absorption ability, increased active sites, and boosted photogenerated electron/hole pairs stability. Radical trapping experiment and ESR analysis indicated the involvement of •OH and h+ in the photoinactivation of bacteria. The photo sterilization reaction of NCs was carried out under different environmental conditions, including light and dark conditions and different pH conditions. The experiment was carried out in sewage-treated water in order to test the real-time application, and the fabricated NCs achieved excellent 95.9 % photo-inactivation of S. aureus cells in sewage treated water and the Chemical Oxygen Demand (COD) of the system was increased after photo inactivation treatment. The fabricated NCs have also shown excellent reusable efficiency of 95% after six runs and the photostability and anti-corrosive nature of NCs were confirmed. The study provides an insight for the employment of photocatalysis for the sterilization of pathogens in real time aquatic environment across the globe.

Interstitial decoration of Ag linking 3D Cu2O octahedron and 2D CaWO4 for augmented visible light active photocatalytic degradation of rifampicin and genotoxicity studies.

A morphological oriented highly active Cu2O-Ag-CaWO4 (CAC) nano-heterojunction was fabricated for the visible light driven degradation of rifampicin (RFP). Octahedron shaped Cu2O being a base material, where the Tagetes shaped CaWO4 and Ag were embedded on it. The shape-controlled morphology of Cu2O and CaWO4 as well as Ag decoration influence high degree of adsorption of RFP and interfacial charge transfer between the nano-heterojunction. Further, the larger specific surface area (129.531 m2/g) and narrow band gap energy (2.57 eV) of CAC nano-heterojunction than the controls support the statement. Positively, CAC nano-heterojunction following Z-scheme-type charge transport mechanism attained 96% of RFP degradation within 100 min. O2•- and •OH are the primarily involved reactive oxidation species (ROS) during the photocatalytic reactions, determined by scavenger study and ESR analysis. The stability and reusability of the CAC nano-heterojunction was assessed through performing cyclic experiment of RFP degradation and it holds 96.8% of degradation even after 6th cycle. The stability of CAC nano-heterojunction after photodegradation was further confirmed based on crystalline pattern (XRD analysis) and compositional states (XPS analysis). Intermediates formed during RFP degradation and its toxicity was discovered by using GC-MS/MS and ECOSAR analysis respectively. The end-product toxicity against bacterial system and genotoxicity of CAC nano-heterojunction against Allium cepa were evaluated and the results were seemed to have no negative causes for the aquatic lives.

Construction of p-n-p nano heterojunction through coupling La2O3, (BiO)2CO3 and Ag3PO4 for effective photocatalytic degradation of doxycycline: Insights into mechanism, pathway and intermediate toxicity evaluation.

The present work is centred around the development of La2O3/(BiO)2CO3/Ag3PO4 (LBA), a p-n-p nano-heterojunction to photodegrade doxycycline under visible light irradiation. Here, ultrasonication assisted co-precipitation method was employed to synthesize the photocatalyst. The photocatalyst was characterized using different analysis such as SEM, TEM, elemental mapping, XRD, XPS, FTIR, Raman, BET, DRS, PL and EIS which confirmed the successful fabrication of LBA and their excellent ability to refrain the e-/h+ recombination owing to the construction of the heterojunction. LBA was found to degrade DOX by 91.75 % with the high mineralization of 87.23%. The impact of the reaction parameters influencing the photodegradation process including the concentration of the NCs and DOX, pH and the influence of the commonly present anions were studied. The stability and reusability of the LBA was assessed through subjecting it to four cycles of photodegradation of DOX. In addition, the recovered LBA was characterized through XPS and XRD analysis to confirm the particles stability and reusability. The active participation of the photogenerated charges and the reactive oxygen species were identified through the scavenging assay and ESR analysis. Further, GC-MS/MS analysis was performed to put forward a plausible photodegradation pathway. The toxicity of the end products as well as the intermediates was predicted through ECOSAR software.

Unravelling the enhanced rifampicin photocatalytic degradation over green-synthesized SrO2@SnIn4S8 p-n heterojunction: Pathway, toxicity evaluation and mechanistic insights.

In recent years, the discharge of pharmaceutical drugs into aquatic ecosystems has become a growing concern, posing a significant threat to aquatic life. In response to this environmental challenge, advanced oxidation processes have gained prominence in wastewater treatment due to their efficacy in eliminating pharmaceutical pollutants and their potential for reusability. In this study, we have fabricated SnIn4S8 coupled SrO2 nano-heterojunction (NH) using a greener co-precipitation approach using leaf extract derived from Acaphyla wilkesiana. The resulting NH exhibited exceptional photocatalytic activity against rifampicin (RIF), achieving a remarkable 97.4% degradation under visible light, surpassing the performance of its individual components. The morphological characteristics of the NH were thoroughly analyzed through SEM, TEM, XRD, and XPS techniques, while EIS, DRS, and BET techniques provided valuable insights into its photocatalytic and optical properties. Furthermore, radical scavenging assays and ESR analysis identified hydroxyl radicals (•OH) and superoxide radicals (O2•-) were the species contributing to the visible light-driven photocatalytic degradation. The study also elucidated the potential degradation pathways and intermediates of RIF through GC-MS analysis. Additionally, the toxicity of the produced intermediates was assessed using the ECOSAR model. The findings have significant implications for the treatment of pharmaceutical pollutants and underscore the importance of eco-friendly synthesis methods in addressing environmental challenges.

The detrimental effects of heavy metals on tributaries exert pressure on water quality, Crossocheilus aplocheilus, and the well-being of human health.

The escalating presence of heavy metals (HMs) in the Panjkora River water and their impact on fish pose a significant challenge to both the ecological community and human health. Consequently, a study was conducted with the primary aim of elucidating their influence on human health-related issues. To address this, the concentrations of heavy metals, including arsenic (As), cadmium (Cd), iron (Fe), manganese (Mn), lead (Pb), and zinc (Zn), in both water and the fish species Crossocheilus diplocheilus were investigated across various locations within the study area. The quantification of HMs concentration was carried out utilizing an atomic absorption spectrophotometer. The highest concentration in water was found as 0.060 mg/L for Pb and lowest for Fe, whereas the highest concentration in fish was 2.028 mg/kg for Pb and lowest for As. Human health risk associated with fish eating was evaluated by using health risk indices (HRI) for non-carcinogenic health risks and targeted cancer risk (TR) for carcinogenic health risks. The values of the health risk index (HRI) were found greater than 1 except Fe (0.0792), Zn (0.782), and Mn (0.541). The highest mean HRI > 1 was recorded for As (62.99), Cd (26.85), and Pb (10.56). This implies that fish consumption from river Panjkora is not safe up to some extent. Similarly, the TR value for As, Cd, and Pb was found 2.8 [Formula: see text], 1.6 [Formula: see text], 2.8 ×[Formula: see text] which showed cancer risk. There is a detected risk to human health associated with the consumption of fish from the Panjkora River. The government must implement adaptive measures to address this significant issue of water pollution in the study area. Additionally, there is a need for further extensive and prolonged research studies in this context.

Biochar and saline soil: mitigation strategy by incapacitating the ecological threats to agricultural land.

Soil salinity caused a widespread detrimental issue that hinders productivity in agriculture and ecological sustainability, while waste-derived soil amendments like biochar have drawn attention for their capacity to act as a mitigating agent, by enhancing the physical and chemical features of soil, and contributing to the recovery of agricultural waste resources. However, the information concerning biochar and salinity which affect the physicochemical characteristics of soils, crop physiology, and growth is limited. To investigate whether biochar mitigates the salinity stress on wheat crop seedlings, we grow them with salinity stress (120 mM), and biochar (20 tons ha-1), and its interactive effects. The soil properties of soil organic carbon (SOC), soil organic matter (SOM), dissolved organic carbon (DOC), and soil available phosphorus (SAP) decreased in the saline soil by 36.71%, 46.97%, 26.31%, and 15.00%, while biochar treatment increased SOC, DOC, and SAP contents by 7.42%, 31.57%, and 15.00%, respectively. On the other hand, dissolved organic nitrogen (DON) contents decreased in all the treatments compared to the control. The root growth traits, SPAD values, leaf nitrogen, photosynthetic parameters, antioxidant enzymes, and reactive oxygen species decreased in the saline treatment while increasing in the biochar and interactive treatment. Thus, these activities resulted in higher leaves and root biomass in the biochar treatment alone and interactive treatment of salinity and biochar. According to principal component analysis, redundancy analysis, and the mantel test, using biochar in conjunction with salinity treatment was found to be more effective than salinity treatment alone. The results of this study suggest that biochar can be used as a sustainable agricultural technique and a means of mitigation agent by lowering soil salinity while increasing the biomass of crops.

Biochar improves the physical and nutritional quality of soil and plant function.Salinity stress declined the physiological activities and biomass of the crop.Biochar mitigates the salinity stress in soil and enhances the plant functioning.Exposure to both treatments enhances the antioxidant enzyme activity and biomass.

Fabrication and characterization of novel, cost-effective graphitic carbon nitride/Fe coated textile nanocomposites for effective degradation of dyes and biohazards.

Textile-based photocatalysts are the new materials that can be utilized as an effective sustainable solution for biochemical hazards. Hence, we aimed to develop a sustainable, cost-effective, and facile approach for the fabrication of photocatalytic fabric using graphitic carbon nitride (g-C3N4) and ferric-based multifunctional nanocomposite. Bulk g-C3N4 was prepared from urea by heating it at 500 °C for 2 h. The structure of ball-milled g-C3N4 was engineered by doping with various amounts of iron (III) chloride hexahydrate solution (0.006 mol/L) and sintered at 90 °C for 24 h to prepare g-C3N4-nanosheets/α-Fe2O3 composites. These nanocomposites have potential avenues towards rational designing of g-C3N4 for improved photocatalytic, antibacterial, and antiviral behavior. The prepared nanocomposite was characterized for its surface morphology, chemical composition, crystal structure, catalytic, antibacterial, and antiviral behavior. The fabrication of ferric doped g-C3N4 nanocomposites was characterized by SEM, EDX, FTIR, and XRD analysis. The coated fabric nanocomposite was characterized for methylene blue dye degradation under visible light, antibacterial and antiviral behavior. The developed textile-based photocatalyst has been found with very good recyclability with photocatalytic degradation of dye up to 99.9 % when compared to conventional g-C3N4 powder-based photocatalyst.

Characterization of Some Cichorium Taxa Grown under Mediterranean Climate Using Morphological Traits and Molecular Markers.

The verification of taxonomic identities is of the highest significance in the field of biological study and categorization. Morpho-molecular characterization can clarify uncertainties in distinguishing between taxonomic groups. In this study, we characterized five local taxa of the genus Cichorium using morphological and molecular markers for taxonomic authentication and probably future genetic improvement. The five Cichorium taxa grown under the Mediterranean climate using morphological traits and molecular markers showed variations. The examined taxa showed a widespread range of variations in leaf characteristics, i.e., shape, type, texture, margin, and apex and cypsela characteristics i.e., shape, color, and surface pattern. The phylogenetic tree categorized the Cichorium intybus var. intybus and C. intybus var. foliosum in a single group, whereas C. endivia var. endivia was grouped separately. However, C. endivia var. crispum and C. endivia subsp. pumilum were classified as a cluster. The recorded variance between classes using the molecular markers SCoT, ISSR, and RAPD was documented at 34.43%, 36.62%, and 40.34%, respectively. Authentication using molecular tools proved the usefulness of a dichotomous indented key, as revealed by morphological identification. The integrated methodology using morphological and molecular assessment could support improved verification and authentication of the various taxa of chicory. It seems likely that the Egyptian chicory belongs to C. endivia subsp. pumilum.

Novel insight on chemo-specific detection of toxic environmental chromium residues existing as recalcitrant Cr(III)-carboxyl complexes using plasmonic silver nanoplatform bi-functionalized with citrate and PVP.

Chromium (Cr) is a toxic environmental pollutant that majorly exists in trivalent and hexavalent forms. Though Cr(VI) is more dangerous than Cr(III), the trivalent Cr forms complexes with environmentally-available organic molecules. This makes them potentially harmful and difficult to detect. In this study, we have designed an ultrasensitive plasmonic nanosensor using citrate and PVP functionalized Ag nanoparticles (Ag-citrate-PVPNPs) for the detection of trivalent chromium organic complexes such as Cr(III)-EDTA (Cr-E), Cr(III)-acetate (Cr-A), Cr(III)-citrate (Cr-C) and Cr(III)-tartrate (Cr-T). The nanoparticles (NPs) were structurally characterized by XRD, SEM, HRTEM, SAED, EDX and elemental mapping. The citrate and PVP molecules played a vital role in the detection mechanism and stability of the sensor. Upon detection, the yellow-colored Ag-citrate-PVP NPs turned into different shades of brown depending on the type of the Cr complex and concentration. It was accompanied by diminishing and/or shifting UV-Visible absorbance peaks due to the aggregation of Ag-citrate-PVP NPs. Further, a linear relationship was observed between absorbance reduction and analyte concentration. The selectivity tests showed that the sensor was non-functional to other metal ions and inorganic anions. The sensor was optimized using pH and temperature studies. The mechanism of detection was elucidated with the help of characterization techniques such as Raman spectroscopy, FTIR, XPS and UV-visible spectrophotometer. The limit of detection (LOD) was found to be 3.29, 4.87, 1.76 and 1.79 nM for Cr-E, Cr-A, Cr-C and Cr-T complexes respectively. This study provides a rapid and sensitive approach for the detection of multiple Cr(III)-organic complexes present in an aqueous solution.

Jatropha curcas L. as a Plant Model for Studies on Vegetative Propagation of Native Forest Plants.

Even though it is a forest native plant, there are already several studies evaluating the small genome of Jatropha curcas L., which belongs to the Euphorbiaceae family, and may be an excellent representative model for the other plants from the same family. Jatropha curcas L. plant has fast growth, precocity, and great adaptability, facilitating silvicultural studies, allowing important information to be obtained quickly, and reducing labor costs. This information justifies the use of the species as a model plant in studies involving the reproduction of native plants. This study aimed to evaluate the possibility of using Jatropha curcas L. as a model plant for studies involving native forest plants and establish possible recommendations for the vegetative propagation of the species using hardwood cuttings. The information collected can be helpful to other native forest plant species, similar to Jatropha curcas L. To this end, the effects of hardwood cutting length (10, 20, and 30 cm) and the part of the hardwood cuttings (basal, middle, and apex) were evaluated. Moreover, the influence of immersing the hardwood cuttings in solutions containing micronutrients (boron or zinc) or plant regulators (2,4-D, GA3) and a biostimulant composed of kinetin (0.09 g L-1), gibberellic acid (0.05 g L-1), and 4-indole-3-butyric acid (0.05 g L-1). The experiments were carried out in duplicates. In one duplicate, sand was used as the substrate, and rooting evaluations were made 77 days after planting. In another duplicate, a substrate composed of 50% soil, 40% poultry litter, and 10% sand was used, and the evaluations of the saplings were performed 120 days after planting. The GA3 solutions inhibited the roots' and sprouts' emissions, while immersion in 2,4-D solution increased the number of primary roots at 77 days after planting. The hardwood cuttings from the basal part of the branch had the best results for producing saplings.

Sunlit photocatalytic degradation of organic pollutant by NiCr2O4/Bi2S3/Cr2S3 tracheid skeleton nanocomposite: Mechanism, pathway, reactive sites, genotoxicity and byproduct toxicity evaluation.

In this study, 3D C2S3 (CS) and 2D Bi2S3 (BS) modified NiCr2O4 nanocomposite (NCO-BS-CS NCs) was prepared by sonochemical assisted co-precipitation method for the enhanced photocatalytic activity. Here, NCO-BS-CS NCs showed band gap energy of 2.23 eV and the PL intensity of NCO-BS-CS NCs was lower than NCO, BS, and CS NPs. Thus, the results indicate the fabricated NCO-BS-CS NCs enhance the charge segregation and lower in recombination rate. NCO-BS-CS NCs showed enhanced photodegradation of methyl orange (MO) (95%) and congo red (CR) (99.7%) respectively. The total organic compound (TOC) analysis shows the complete mineralization of about 91 and 98% for MO and CR respectively. Furthermore, the Fukui function was used for the prediction of reactive sites in the photodegradation pathway of MO and CR by NCs. ECOSAR program was done to determine the toxicity of the intermediate and the results conclude that the degraded product shows nontoxic to the environmental organism (fish, daphnia, and algae). Thus, the fabricated NCO-BS-CS NCs can be used for the remediation of toxic organic pollutants from the waste water by photocatalytic degradation.

Zn alleviated salt toxicity in Solanum lycopersicum L. seedlings by reducing Na+ transfer, improving gas exchange, defense system and Zn contents.

Soil secondary salinization is a serious menace that has significant influence on the sustainability of agriculture and threatens food security around the world. Zinc (Zn) as an essential plant nutrient associated with many physio-biochemical processes in plants and improve resistance against various abiotic stresses. The role of Zn in acclimation of Solanum lycopersicum L. challenged with salt stress is miserly understood. A hydroponic study was performed with two tomato varieties (Riogrande and Sungold) exposed to the salinity stress (0 mM and 160 mM NaCl) under two Zn concentrations (15 µM and 30 µM ZnSO4). The results revealed that salt stress exerted strongly negative impacts on root and shoot length, fresh and dry biomass, plant water relations, membrane stability, chlorophyll contents, Na+/K+ ratio along with inferior gas exchange attributes and activities of antioxidant enzymes. Moreover, Riogrande was found to be more resistant to salinity stress than Sungold. However, Zn supply significantly alleviated the hazardous effects of salinity by altering compatible solutes accumulation, photosynthetic activity, water relation, soluble sugar contents and providing antioxidant defense against salt stress. The salinity + Zn2 treatment more obviously enhanced RWC (19.0%), MSI (30.8%), SPAD value (17.8%), and activities of SOD (31.7%), POD (28.5%), APX (64.5%) and CAT (23.3%) in Riogrande than Sungold, compared with the corresponding salinity treatment alone. In addition, salinity + Zn2 treatment significantly (P > 0.05) ameliorated salinity stress due to the depreciation in Na+/K+ ratio by 63.3% and 40.8%, Na+ ion relocation from root to shoot by 10.4% and 6.4%, and thereby significantly reduced Na+ ion accumulation by 47.4% and 16.3% in the leaves of Riogrande and Sungold respectively, compared to the salinity treatment alone. Therefore, it was obvious that 30 µM Zn concentration was more effective to induce resistance against salinity stress than 15 µM Zn concentration. Conclusively, it can be reported that exogenous Zn application helps tomato plant to combat adverse saline conditions by modulating photosynthetic and antioxidant capacity along with reduced Na+ uptake at the root surface of tomato plant.

Corrigendum: Genome-Wide Identification and Expression Profiling of Germin-Like Proteins Reveal Their Role in Regulating Abiotic Stress Response in Potato.

[This corrects the article DOI: 10.3389/fpls.2021.831140.].

Assessment of Mineral Nutrient Efficiency in Genetically Diverse Spinach Accessions by Biochemical and Functional Marker Strategies.

Leafy vegetable crops are considered as a natural source of mineral nutrients that could decrease the risk factor of many growth issues in children and adults. Spinach is globally considered as the most desirable leafy crop, due to its taste and nutrient richness along with greater nitrate contents and better nitrogen use efficiency. To evaluate the mineral nutrient efficiency of this crop, thirty genetically diverse spinach accessions were analyzed through nutritional and functional marker strategies. The accession 163,310 from Pakistan was found to be rich in minerals (sodium, calcium, potassium, zinc, and manganese) and nitrates. However, the oxalate contents were lesser in the accessions that had greater quantity of nutrients. These represented a negative correlation between mineral availability and oxalate accumulation in the leaves. To study the relationship of oxalates and minerals in the accessions, a functional marker analysis was performed, based on the genes involved in oxalate metabolism and disease resistance in spinach. High level of genetic polymorphism was observed among the accessions represented with 115 polymorphic bands out of 130 bands. Heat map clustering represented the accessions from Asian countries (Pakistan, India, China, and Iran) as the most adaptable accessions to the local environment. The correlation between nutritional and genetic analysis also revealed the nutrient richness of these accessions along with good oxalate metabolism and disease resistance. Hence, these accessions could be considered as useful genotypes in future breeding programs.

Green synthesis of two-electron centre based ZnO/NiCo2S4 QDs-OVs using Punica granatum fruit peel extract for an exceptional visible light photocatalytic degradation of doxycycline and ciprofloxacin.

Biosynthesis of nanomaterials using plant extract makes them attractive in the field of photocatalysis as they are environmental friendly. The current study focused on the biosynthesis of ZnO/NiCo2S4 QDs (NCs) using Punica granatum fruit peel extract as the reducing agent. The nanomaterials were characterized with XRD, FTIR, Raman, SEM, TEM, UV-vis DRS, BET, PL, EIS, and ESR analysis and were used for photocatalytic degradation of doxycycline (DOX) and ciprofloxacin (CIP). The bandgap of ZnO is 3.2 eV, and the decoration of NiCo2S4 QDs aids in narrowing the bandgap (2.8 eV), making the NCs visible light active. The fabricated NCs achieved 99 and 89% degradation of DOX and CIP respectively. The photocatalytic efficiency of ZnO/NiCo2S4 QDs was much higher compared to individual ZnO and NiCo2S4 QDs. The half-life period of DOX and CIP were evaluated to be 58 and 152 min respectively. The percentage of TOC removal in the photodegraded product of DOX and CIP was estimated to be 99 and 89% respectively, indicating the mineralization of the compounds. The enhanced photocatalytic efficiency of the NCs was attributed to the narrowed visible light active bandgap, synergistic charge transfer across the interface, and lower charge recombination. The intermediates formed during the photocatalytic degradation of DOX and CIP were analyzed using GC-MS/MS analysis, and the photodegradation pathway was elucidated. Also, the toxicity of the intermediates was computationally analyzed using ECOSAR software. The fabricated ZnO/NiCo2S4 QDs have excellent stability and reusability, confirmed by XRD and XPS analysis. The reusable efficiency of the NCs for the photocatalytic degradation of DOX and CIP were 98.93, and 99.4% respectively. Thus, the biologically fabricated NCs are shown to be an excellent photocatalyst and have wide applications in environmental remediation.

Robust visible light active CoNiO2-BiFeO3-NiS ternary nanocomposite for photo-fenton degradation of rhodamine B and methyl orange: Kinetics, degradation pathway and toxicity assessment.

Sustainable wastewater treatment is crucial to remediate the water pollutants through the development of highly efficient, low-cost and separation free photocatalyst. The aim of this study is to construct a novel CoNiO2-BiFeO3-NiS ternary nanocomposite (NCs) for the efficient degradation of organic pollutants by utilising visible light. The NCs was characterized by various physiochemical techniques, including HR-TEM, SEM, XPS, FT-IR, ESR, EIS, PL, UV-visible DRS, and N2 adsorption and desorption analysis. The photocatalyst exhibits extraordinary degradation efficiency towards MO (99.8%) and RhB (97.8%). The intermediates were determined using GC-MS analysis and the degradation pathway was elucidated. The complete mineralization was further confirmed by TOC analysis. The CoNiO2-BiFeO3-NiS ternary NCs have shown excellent photostability, structural stability and reusability even after six cycles and it is confirmed by XRD and XPS analysis. The kinetic study reveals that the photodegradation of the dyes follows first order reaction. The influence of different pH, dye concentrations and NCs dosages were investigated. The intermediate toxicity was predicted by computational stimulation using ECOSAR software. The NCs shows promising potential for ecological safety which demonstrates its practical application in the treatment of waste water pollutants in large scale.

A prominent dual heterojunction framed CuWO4/Bi2WO6/MnS ternary NCs for para-chlorophenol degradation, Cr(VI) reduction & toxicity studies.

In account of environmental remediation, an ideal photocatalyst was fabricated for the effective treatment of water systems. Herein, dual heterojunctions framed CuWO4/Bi2WO6/MnS nanocomposite (NCs) was synthesized via simple co-precipitation method followed by ultra-sonicated assisted route. The prepared NCs were investigated its photocatalytic degradation performance using para-chlorophenol (4-CP) and reduction of chromium VI (Cr (VI)) under visible light irradiation. The photocatalyst were characterized by various analytical techniques including XRD, HR-TEM, XPS, UV-vis DRS, FE-SEM, EIS, PL, ESR, Raman and N2 adsorption and desorption studies. The excellent photodegradation of 4-CP was observed within 180 min by the NCs. Similarly, the Cr (VI) reduction was about 97% within 140 min. The effect of pH and influence of different dosage of NCs and 4-CP on the photodegradation efficiency was investigated. The reusability and stability of the NCs was examined over 6 consecutive runs where the XRD and XPS confirm the structural stability of the prepared NCs. The scavenging experiment were carried out to elucidate the mechanism and the active species involved were O2-• and OH• radicals. The TOC analysis affirmed the complete mineralization of the prepared NCs. The ecotoxicity analysis was carried out to determine the toxicity effect of intermediates using ECOSAR software and the end product toxicity was also evaluated against E. coli and S. epidermis. The end product toxicity study also confirmed that the degraded product was less toxic compared to parent compound. Further, the genotoxicity study was done to understand the environmental impact using allium cepa and results confirms that there are no causes of cytotoxicity & genotoxicity by the prepared NCs. Therefore, the prepared NCs can be economical, efficient with excellent photocatalytic performance and environment friendly.

Correction: Rubnawaz et al. Polyphenol Rich Ajuga bracteosa Transgenic Regenerants Display Better Pharmacological Potential. Molecules 2021, 26, 4874.

The authors of this paper [...].

Double Z-Scheme ZnCo2O4/MnO2/FeS2 photocatalyst with enhanced photodegradation of organic compound: Insights into mechanisms, kinetics, pathway and toxicity studies.

The present work highlights the preparation of double Z-scheme ZnCo2O4/MnO2/FeS2 nanocomposite (NCs) and investigated its photocatalytic activity against methyl orange (MO) dye degradation under visible light. An array of techniques was carried out to characterize the nanoparticles (NPs) in order to evaluate their morphological, structural, optical, and photocatalytic properties using FE-SEM, TEM, XRD, N2 adsorption and desorption studies, PL, UV-visible spectrophotometer, XPS, Raman, and UV-vis DRS analysis. The degradation efficiency of NCs was tested along with different parameter studies such as different pH, NCs concentration, dye concentration, reusability and structural stability. The NCs exhibited complete photodegradation of MO dye under visible light within 80 min at pH 4. The structural and compositional stability of the prepared NCs over 6 consecutive cycles was tested via XRD and XPS analysis. The results of active species trapping experiments showed that O2-• and OH• are responsible for the degradation of MO dye. The TOC analysis showed 95% of mineralization by the prepared NCs. The MO dye degradation pathway was determined using GC-MS/MS analysis and drafted all the intermediates involved. End product toxicity via seed germination and intermediate toxicity study using ECOSAR software results in less toxicity of end product compared to parent compound. Finally, the genotoxicity of the prepared NCs was evaluated using Allium cepa and showed its no causes of cytotoxicity & genotoxicity by the prepared NCs. ZnCo2O4/MnO2/FeS2 NCs exhibited its high photocatalytic activity and the toxicity studies confirms that there is no cause of any environmental impact.

Plasma-assisted in-situ preparation of L-cystine functionalized silver nanoparticle: An intelligent multicolor nano-sensing of cadmium and paracetamol from environmental sample.

L-cystine (L-cys) functionalized plasmonic silver nanomaterial (Ag NPs) was fabricated toward the selective and sensitive detection of paracetamol and cadmium. The prepared L-cys-Ag nanoparticles (NPs) were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction spectroscopy (XRD) and fourier transform infrared spectroscopy (FTIR) analyses. SEM imaging show that Ag NPs was decorated on the surface of L-cysteine 3D cubic nanosheet. L-cys-Ag NPs showed selective and sensitive detection towards paracetamol and cadmium. The interference study confirms that the presence of other metal ions didn't inhibit the detection of cadmium by L-cys-Ag NPs. The limit of detection of paracetamol and cadmium by L-cys-Ag NPs was calculated to be 1.2 and 2.82 nM respectively. In addition, the real sample detection of paracetamol on blood serum and urine, and cadmium on STP were performed and the recovery percentage was above 97%. Further, the real sample analysis was performed in tap and drinking water and the recovery percentage was more than 98%. The analytic logic gate on the multicolour detection of cadmium and paracetamol was performed for the semi-quantitative monitoring of paracetamol and cadmium by L-cys-Ag NPs. The developed L-cys-Ag NPs were found to be an effective tool for the monitoring of cadmium in environmental water bodies and paracetamol in blood and urine.